国产一区无码_AV大片在线不卡免费观看网址_偷窥中国老太XXXXHD_特级婬片日本高清视频,,国产一级福利片,欧美一级a片免费現场,亚洲精品无码在线观看,大学生高潮潮喷在线播放,18以下禁止网站观看永久免费,中文字幕乱在线中文高清,手机在线视频a

What are the precautions when using wet polishing machine?

Visits:326

Why do we need to maintain the machine? What are the methods of maintenance? Because of good maintenance of the machine, its service life will be longer, fewer problems and cost savings. Therefore, we should pay attention to careful maintenance when using.

Maintenance method: after the completion of the work, the staff need to remove the needle holder and polishing pad and use a clean cloth to clean the surface of the machine and spare parts; When not in use, use a useless pad under the drive disc, can play a protective role; Check whether the vent of the motor cover is smooth, if the dust is thick, then it is necessary to remove the motor shell, and vacuum all the dust; In addition, the wheels, bearings should often add lubricating oil, in order to prevent rust, a comprehensive overhaul every quarter.

Points to pay attention to when using the machine:

1. Check whether the polishing brush of the polishing machine is clean and needs to be replaced.

2. Check whether the controller of the adjusting key is in the normal speed position.

3, polishing before the need to remove the ground garbage, debris and sand, etc..

4. Do not drive the machine too fast to avoid collision.

5. Do not lift the operating lever during operation, which will cause the machine to lose control.

Previous:The working principle of polishing machine operation

Next None:Operating automatic polishing machine some experience tips