国产一区无码_AV大片在线不卡免费观看网址_偷窥中国老太XXXXHD_特级婬片日本高清视频,,国产一级福利片,欧美一级a片免费現场,亚洲精品无码在线观看,大学生高潮潮喷在线播放,18以下禁止网站观看永久免费,中文字幕乱在线中文高清,手机在线视频a

Hello, welcome to the website of Ningbo Xirui Machinery Co.

Service hotline: 0574-88390786

Operating automatic polishing machine some experience tips

Visits:348

Automatic polishing machine has become a very important production equipment. The existence of such production equipment can make the product more ideal when producing multiple parts. In order to better understand the many parts of this type of equipment, polishing machine equipment in terms of operation is also important. It is understandable that many parts, such as deburring the finished product, surface polishing of the finished product and polishing and cleaning work, have become very important components in the process of using a specific polishing machine. Only after every part of the polishing machine manufacturer can be considered very carefully, people can better grasp all aspects of the product, but in operation, we must pay attention to some polishing operation details in order to improve the polishing efficiency, will explain for you the following points:


1. The wheel of the automatic polisher turns itself. Place the workpiece below the center axis of the grinding wheel. If this is not the case, the grinding wheel can easily detach from the workpiece.


2. Press the polishing wax on the polishing wheel, do not exert too much force, and make the polishing wheel rotate smoothly.


3. Protective cover: prevent flying objects from flying out and hurting people in the polishing process


4. After polishing, stop using a soft cloth dipped in talcum powder to wipe the outside. To remove wax, polishers are designed to dewax when necessary.


5. Gently touching the surface of the grinding wheel with a polishing machine can help to remove sharp angles from the appearance and add wax under desired conditions.


6. If there is too much wax, we can use professional tools to stop removal. If it doesn't work out, we can reapply the wax.


7. Check the circuit regularly every month. If it is damaged, please replace it immediately.


8. Check all components of the device periodically every month. If it is loose, reinforce it immediately. If there is any damage, please replace it immediately.


9. Regularly turn off the power supply of the main electrical control box, clean the box carefully, remove the metal powder with a vacuum cleaner, and check whether the signal light function is normal.


10. Make sure there is no damage to the active compressed air pipe and that the pressure gauge is functioning properly.


11. Dust near mechanical surfaces and polishing wheels should also be cleaned regularly. Dust on the polishing wheel usually remains during the polishing process. Long-term uncleanliness will increase the diffusion of dust in the process and affect the polishing effect.


12. Lubricate gears or bearings regularly.


13. Make sure there is no damage to the active compressed air pipe and that the pressure gauge is functioning properly.


14. Periodically check the running status of components and check whether components are damaged. Repair and replace damaged parts in time to ensure that it does not affect other parts and the operation of the whole machine.


15. Clean the inside of the equipment after work and keep it clean.


底部logo

Service hotline:

Fax:0574-88172048

Phone:13805866970

Email:[email protected]

Address:No.20, Xingzhong Road, Qijiashan Street, Beilun District, Ningbo (In the yard of Ningbo Shengfeng Pipe Industry Group)

Record No:浙ICP備19000000號

版權所有?Copyright ? 2022-2032 Ningbo Xirui Machinery Co.                                  Technical Support:狼騰設計 · 制作維護